8 places we often forget to clean

8 places we often forget to clean

Although we pride ourselves on keeping our homes clean, there are often a few places we forget to focus on when cleaning. Here are six places that are often overlooked:

  1. Ceiling fans:

Over time, ceiling fan blades can get dust and dirt, making them less effective at circulating air.

The first step is to turn off the fan and dust the blades with a soft cloth. If dirt has accumulated, you can remove it with a vacuum cleaner. Once the blades are dusty, you can clean them with a mild soap and water solution. Be sure to thoroughly rinse and dry the blades before turning the fan back on. With a little TLC, your ceiling fan can stay clean and dust-free.

  1. Motherboards:

Skirting boards are one of the areas that are often neglected when cleaning. They are low and less visible than other surfaces. However, they can get dusty and dirty just like any other surface in your home. To clean them effectively, start by vacuuming or dusting the baseboards to remove all traces of dirt and grime. Then use a damp cloth to wipe down the boards and make sure they go with the grain. You may need to use a mild soap or cleaning solution for stubborn stains. Once you’ve wiped down the baseboards, make sure to dry them completely to avoid water damage.

  1. Lights:

Lighting fixtures are one of the most important elements in any room, yet they are often the most overlooked. Dust and dirt can quickly accumulate on bulbs, shades and bases, reducing the amount of light emitted and making it difficult to clean the fixture itself. To get your fixtures really clean, start by removing all the bulbs. Then use a microfiber cloth or soft brush to dust the shades and base. If the dirt or grime is stubborn, you can mix equal parts vinegar and water to create a natural cleaning solution. Apply the solution to a cloth and wipe the product, being careful not to get the water on the electrical components.

  1. Window sills:

Window sills are easy to overlook, however, dust, pollen, and other allergens can accumulate on window sills, making them a potential health hazard. In addition, they can also harbor mold if they are not cleaned regularly. To clean window sills effectively, start by dusting them with a soft cloth or duster. Then use a mild all-purpose cleaner or white vinegar solution to remove any remaining dirt and grime. Afterwards, be sure to rinse the area with clean water to remove any residue. For stubborn stains or mold growth, you may need to use a stronger cleaning solution or even sandpaper.

  1. Ventilation holes:

Dust and dirt can accumulate in the vents, which can reduce the efficiency of your heating and air conditioning system. Although it may seem like a daunting task, cleaning the vents is actually quite simple. The first step is to dust the vents with a microfiber cloth or a vacuum cleaner. Then use a damp cloth to wipe the vent blades to remove any dirt or debris. For stubborn stains, you can use a mild detergent or white vinegar. Once the vents are clean, be sure to turn off the device before letting it dry completely.

  1. Door :

Whether it’s the front door that guests use or the back door that the dog uses to enter and exit, doors can get pretty dirty. So how to clean them properly? Start by sweeping or vacuuming any dirt, dust or debris that may be on the door. Then, using a mild all-purpose cleaner and a soft cloth, wipe both sides of the door. Pay special attention to the door handle, as it is often one of the dirtiest parts of the door. Once you have cleaned both sides of the door, open it and clean the inside of the door. Finally, buff the door with a microfiber cloth until it shines.

  1. Washing machine tray:

Washing machines can become a breeding ground for bacteria and mold over time. One of the most overlooked areas is the dispenser where you pour the liquid detergent. Since it is a damp and dark environment, it is an ideal place for mold to grow. For proper cleaning, it is necessary to remove the detergent dispenser and scrub it thoroughly with a brush. Use a mild disinfectant or bleach solution to kill any bacteria. If mold builds up, you may need to use a stronger cleaner. Before replacing the detergent dispenser, make sure to rinse the cleaner completely.

  1. Sink or sink plug:

Most of us make sure our sinks are clean and free of clogs, but there are places we often overlook. One of those places is the P-trap, which is under the sink. The siphon is responsible for collecting hair and dirt that falls into the sink, but it can become clogged over time. When this happens, the water starts backing up into the sink, making it difficult to use. To clean the P-trap, simply remove the curved part of the hose and rinse it with hot water. Don’t wait for the dirty water to rise to the surface, use a powder unblocker once a month. It is a very strong substance that you can drain overnight and pour water on the next day. This will keep your sink free of bacteria.

* Presse Santé strives to convey knowledge about health in a language accessible to all. IN NO CIRCUMSTANCES can the information provided replace the advice of a medical professional.
Author Image
adel

Leave a Reply

Your email address will not be published. Required fields are marked *